Z-Wave

Use this beautifully designed Aeotec Recessor to mount your Aeotec MultiSensor 6 or Aeotec TriSensor into your ceiling or wall cavity so it's out of sight and discreet.

If your light switch controls low-voltage lighting that uses less than 4 watts, Bypass may be needed when using Aeotec Z-Wave Nano Dimmer for control and automation.

The Aeotec Z-Wave Plus Range Extender does what it says – it receives Z-Wave wireless signals and repeats them on to other Z-Wave devices - creating a stronger and more robust Z-Wave wireless network.

Designed to compliment the Aeotec Z-Wave Water Sensor 6. With Dock and Water Sensor 6 combined, your home is protected by the most advanced Z-Wave flood sensor available.

Water Sensor 6 offers leak and flood detection, along with a temperature sensor for HVAC and underfloor heating management. At the first sign of water where it shouldn't be... Water Sensor 6 will sound a 60dB siren and report back to your Z-Wave Gateway Controller which can then initiate other Z-Wave devices... from sending alerts to turning off electricity and water valves in order to protect your home from water damage.

Nano Shutter integrates with 240V AC motors and converts them to Z-Wave Plus. Instantly, whatever they’re connected to can be wirelessly controlled and intelligently automated with a broad selection of devices.

Classic design. Advanced features. WallSwipe integrates with Aeotec's Nano Dimmer, Nano Switch or Nano Shutter in-wall controllers to offer intelligent and convenient capacitive wall switch and motion switch control. WallSwipe includes a screw-less switch plate compatible with Australian wall switch installations.

The new Nano Dimmer by Aeotec is very small and fits easily behind existing wall switches. With GEN5 and the latest Z-Wave Plus chipset, the Nano Dimmer is not only small, but also efficient, user friendly and easy to install. Compatible with a wide range of lights, including both leading and trailing edge LED lighting, the Nano Dimmer makes it easy to add intelligent Z-Wave control to your dimmable lights.

The new Dual Nano Switch by Aeotec is very small and fits easily behind existing wall switches. With GEN 5 and the latest Z-Wave Plus chipset, the Dual Nano Switch (with power metering technology) is not only small, but also efficient, user friendly and easy to install.

The new Nano Switch by Aeotec is very small and fits easily behind existing wall switches. With GEN 5 and the latest Z-Wave Plus chipset, the Nano Switch (available with or without power metering technology) is not only small, but also efficient, user friendly and easy to install.

Aeotec's Door Window Sensor 6 is a small, battery-powered Z-Wave Plus magnetic door / window sensor which can inform a Z-Wave controller if a door or window is open or closed. Its inbuilt lithium-ion battery allows it to have a perfectly small profile measuring only 9 mm.

The Aeotec Door/Window Sensor 7 is a Z-Wave Plus device for detecting if a door or window is opened or closed. Small, battery powered (included) and easily attached to virtually anything that opens or closes around your home. Door Window Sensor 7 also includes universal "dry contact" terminals allowing you to wire in other external sensors.

The Aeotec Z-Wave Plus Recessed Door/Window Sensor 7 is a small, wireless Z-Wave (700 Series) device that detects the opening and closing of your door/window. Easily installs into your door or window frame, making the sensor virtually invisible.

The Aeotec Z-Wave MultiSensor 6 can measure motion, humidity, light levels, temperature, vibration and UV all from one very small (and very clever) device. Featuring the latest Z-Wave Gen 5 chipset and firmware – this is the cutting edge of Z-Wave technology.

Three unique sensors crafted into TriSensor’s compact housing. A motion sensor to monitor a room’s occupancy, a temperature sensor to manage its environment, and a light intensity sensor to manage connected lighting. Z-Wave Plus certified. Includes 1 x 3V CR123 lithium battery.

The Aeotec Z-Wave RGBW LED Bulb will turn any standard light fitting into an intelligent Z-Wave enabled light. Not just any light... 16 million, perfect shades of light - from soft whites to any colour in the spectrum. Featuring the latest Z-Wave Gen 5 chipset and firmware – this is the cutting edge of Z-Wave technology.

Available in Edison Screw (E27) or Bayonet (B22) fitting.

Aeotec Z-Wave Heavy Duty Smart Switch can switch powered electrical devices and appliances that draw up to 40 amps or 9600 Watts of power. Includes built-in Z-Wave signal repeater and extended Z-Wave wireless range (up to 150m outdoors). Rated IP44 for both outdoor and indoor use.

Smart Switch 6 is a smart plug that lets you wirelessly control whatever is plugged into it. You can do that via remote control or a smart phone, and from an automation schedule or from the power outlet itself. Now your wall socket is smarter and connected.

The Aeotec WallMote (available with 2 or 4 touch-buttons) is a stylish and advanced wireless Z-Wave remote controlThe WallMote includes a thin mounting plate and 3M adhesive pad for easy placement anywhere you would like convenient control of your Z-Wave devices and scenes. The mounting plate cleverly holds WallMote in place using small magnets, allowing for easy removal so it can also be used as a portable Z-Wave remote control. The built-in lithium-ion battery is easily recharged using the included mini USB cable - so you will never need to buy batteries.

The Aeotec Z-Stick Plus (Gen 5) is a self-powered Z-Wave USB dongle with portable push-button inclusion for Z-Wave devices (independent from external power and host microprocessor). When attached to a host processor (PC etc), it becomes a Z-Wave communication device, which allows Z-Wave software to communicate with your Z-Wave devices.

IMPORTANT: Now works with Raspberry Pi 4.