Chuango Wireless Alarm

Signal repeaters repeat the communication signal of any sensors, strobe/sirens, remote controls etc. Signal repeaters can be used in larger applications to enable the alarm control panel to protect a larger premises or location.

Wireless panic button pendants are used to trigger the alarm system in the event of an emergency. Because they are wireless they can be carried around with you. When the panic button is pressed a signal is sent to the alarm control panel and it will trigger the alarm regardless if the alarm system is armed or disarmed. It is connected to the 24 hour zone on the alarm.

This wireless solar powered strobe/siren has front and back tamper switches that will trigger the siren and strobe if the front cover is removed or if the casing is removed from the wall. It has a built-in rechargeable lithium battery that provide 10 days standby power in case there's no sun. When your alarm system is in armed mode a red LED will flash slowly to advise you the alarm is turned on.

This is a wireless strobe/siren however it does require to be plugged onto a mains power point. It comes with a 12volt power adaptor. There is a tamper switch on the casing and will trigger the siren and strobe if the front cover is removed or if the casing is removed from the wall. It has a built-in rechargeable battery backup in case of power failure.

This is a wireless mains powered indoor strobe siren. You can connect as many of these as you like to your alarm control panel. It simply needs to be plugged into a mains power point and comes with a built-in rechargeable backup battery in case of power failure.

Wireless flood sensors are used to detect the presence of water such as flooding. They are a good idea to have in areas of the home or workplace where flooding might occur as a result of taps accidently being left on. This could be useful in a laundry or bathroom location.

Wireless glass break sensors are used to detect when a window is smashed. They cover an area of up to 6x6 metres so they can protect a number of windows.

Wireless roller or tilt door sensors are used to detect when a door is opened. These are called Reed switches. They consist of the Reed switch sensor and a magnet. The Reed switch is secured to the floor and the magnet is fitted to the door. When they are separated the sensor sends a signal to the alarm control panel. If the alarm system is armed it will be triggered.

Wireless door/window sensors are used to detect when a door or window is opened. These are called Reed switches. They consist of the Reed switch sensor and a small magnet. The Reed switch is placed on either the frame of the door/window and the magnet on the opening part of the door/window. When they are separated the sensor sends a signal to the alarm control panel, if the alarm system is armed it will be triggered.

Featuring proprietary infrared technology, fuzzy logic and sophisticated algorithms, the Chuango Wireless Outdoor Motion Sensor accurately detects for human body movements and effectively cuts down on interference and false alarms with dual detection: infrared and microwave. The solar panel and waterproof housing make it ideal for outdoor use.

Wireless motion sensors known as PIR’s are used to detect body movement in an open space. This is a curtain PIR sensor. It is idea for protecting areas where there is a lot of glass windows. It consists of digital dual-core fuzzy logic infrared control chip which means it effectively identifies human body movement.

Wireless motion sensors known as PIR’s are used to detect body movement in an open space. This is a 360 degree detection ceiling mount PIR sensor. It consists of digital dual-core fuzzy logic infrared control chip which means it effectively identifies human body movement. This PIR is ideal for open spaces.

Featuring proprietary dual-core infrared technology, fuzzy-logic and sophisticated algorithms, the Chuango Wireless Motion Sensor (Pet Friendly) accurately detects for human body movement and effectively cuts down on interference and false alarms with built-in automatic temperature compensation and anti-draft technology.

This wireless RFID keypad can be connected to your G5 security alarm system and is useful when you have a number of people needing to arm and disarm your alarm system. You can also use the Chuango RFID tags to disarm your G5 alarm system rather than entering a code on the keypad.

The RFID Swipe Tag can be used to disarm the G5 alarm control panel. You simply hold it up to the control panel and the G5 will disarm. You can program the G5 to send an SMS notification to the alarm administrator advising which user has disarmed the alarm.

Use the Chuango Keychain Remote Control to easily arm and disarm your G5 alarm system (with or without sound notification). There is also a handy 24 hour panic button that will instantly trigger the G5 alarm in case of an emergency (even if the system is not armed). Two Chuango Keychain Remote Controls are included.

The Chuango HD WiFi Camera (IP116) is an intuitive, plug-and-play home camera that delivers excellent, smooth video at 720p HD quality. With one-click WiFi and sound verification setup, “installation” can be done in seconds, with no wires and no fuss.

This kit includes everything you need to protect a large sized home, office, warehouse or retail store - including the award-winning Chuango H4 LTE Security Hub with built-in WiFi and (optional) wireless 4G communication. Easy DIY installation - expand your system now or in the future.
Includes free app for Apple or Android which can be shared with up to 10 family members, friends or staff. Compatible with Amazon Alexa and Google Home voice control.
Kit includes: 1 x H4 LTE Security Hub, 5 x Wireless Motion Sensors, 3 x Wireless Door / Window sensors, 1 x Wireless Indoor Siren, 1 x Mains Powered outdoor Siren and 4 x Keychain Remote Controls.
RRP $931 - Save $132.

This kit includes everything you need to protect a medium sized home, office, warehouse or retail store - including the award-winning Chuango H4 LTE Security Hub with built-in WiFi and (optional) wireless 4G communication. Easy DIY installation - expand your system now or in the future.
Includes free app for Apple or Android which can be shared with up to 10 family members, friends or staff. Compatible with Amazon Alexa and Google Home voice control.
Kit includes: 1 x H4 LTE Security Hub, 3 x Wireless Motion Sensors, 2 x Wireless Door / Window sensors, 1 x Wireless Indoor Siren and 3 x Keychain Remote Controls.
RRP $651 - Save $102.